| 12.30.2538.001.41.1503 Standard 5 Slewing Ring Bearings | d:170 mm; Threads per inch:8; B:27.254 mm; d1:147.637 mm; Mass adapter sleeve assembly:9.55 kg; B4:30.963 mm; Hydraulic nut:HMVC 34E; Sleeve:S 134x5.13/16; G:169.139 mm; B1:156.921 mm; d3 max.:219.989 mm; |
| 12.30.1630.000.11.1503 Standard 5 Slewing Ring Bearings | Sealed Speed Rating n3:1000 rpm; Accessories:One Shield & Snap-Ri; B:56.00 mm; d:240.000 mm; Grease Speed Rating Open/Shielded n1:1700 rpm; D:360.0000 mm; Basic Static Radial Load Rating Co:315000 N; Oil Speed Rating Open/Shielded n2:2000 rpm; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:255000 N; |
| 11.25.1461.001.21.1503 Standard 5 Slewing Ring Bearings | Permissible sliding velocity v min.:0.25 m/s; d:45 mm; Tolerance shaft:h8; Mass bushing:0.18 kg; Tolerance housing:H7; D:55 mm; Coefficient of friction µ max.:0.1; Coefficient of friction µ min.:0.05; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v max.:5 m/s; Specific dynamic load factor K:10 N/mm²; B:35 mm; |
| 92.25.1310.991.21.1503 Standard 5 Slewing Ring Bearings | ba:31.75 mm; da:65 mm; Cap bolt:2 x 1/2-13 UNC; P150°:16 kN; L:279.4 mm; P180°:19.1 kN; Pa:12 kN; H2:25.4 mm; PG:1/8 NPT; S:3.969 mm; P60°:50.3 kN; PosiTrac Plus contact element (dc shaft position):B10724-37; Appropriate attachment bolt size G:0.625 in; dc:61.913 mm; P120°:18 kN; H1:76.2 mm; A2:112.713 mm; Cap bolt, SAE grade:5; Max. speed for PosiTrac Plus seal:1950 r/min; Labyrinth ring (db shaft position):LOR 55; |
| 61.50.2645.001.49.1504 Standard 5 Slewing Ring Bearings | P120°:116 kN; Cap bolt, SAE grade:8; J min.:406.4 mm; Stabilizing ring:2 x SR-0-24; P90°:180 kN; R2:38.1 mm; Cap bolt:7/8-9 UNC; H1:152.4 mm; R1:87.313 mm; Mass pillow block:87.5 kg; N1:28.575 mm; P60°:301 kN; ba:64.294 mm; L:511.175 mm; A1:149.225 mm; Bearing limiting speed:2800 r/min; Initial grease fill:481.95 g; Housing:SAFS 034 KA; Da:259.999 mm; Pa:34 kN; |
| 162.45.2654.891.41.1503 Standard 5 Slewing Ring Bearings | d:85.000 mm; Sealed Speed Rating n3:2800 rpm; Grease Speed Rating Open/Shielded n1:4300 rpm; D:150.0000 mm; Basic Static Radial Load Rating Co:64000 N; Grease Speed Rating n1:4300 rpm; Oil Speed Rating Open/Shielded n2:5000 rpm; B:28.00 mm; Basic Dynamic Radial Load Rating C:83200 N; Oil Speed Rating n2:5000 rpm; Fillet Radius ra:2.00 mm; Accessories:Seal & Snap-Ring; |
| 12.30.1995.001.41.1503 Standard 5 Slewing Ring Bearings | h:36.513 mm; R2:19.05 mm; H1:76.2 mm; PG:1/8 NPT; J min.:196.85 mm; RG:1/8 NPT; H:147.637 mm; Initial grease fill:107.73 g; A1:69.85 mm; N1:19.05 mm; Stabilizing ring:2 x SR-1610; Mass pillow block:10 kg; Cap bolt, SAE grade:8; Cap bolt:2 x 1/2-13 UNC; H2:28.575 mm; P90°:23.6 kN; Da:110 mm; Cap bolt recommended tightening torque:149.1 N·m; R1:42.862 mm; P180°:15.6 kN; |
| 91.25.1310.990.11.1503 Standard 5 Slewing Ring Bearings | Fillet Radius rb:0.60 mm; Grease Speed Rating n1:8000 rpm; D:62.0000 mm; Fillet Radius ra:1.00 mm; d:30.000 mm; Oil Speed Rating n2:10000 rpm; Basic Static Radial Load Rating Co:26000 N; Basic Dynamic Radial Load Rating C:30700 N; B:32.00 mm; |
| 61.30.1320.001.21.1504 Standard 5 Slewing Ring Bearings | P150°:3000 kN; P180°:3800 kN; H2:130 mm; P120°:3400 kN; H:810 mm; Cap bolt, size:M 42x280; Eye bolt, size:2 x M 42; Appropriate attachment bolt, size G:42 mm; Ca:224 mm; Q150°:3350 kN; Locating ring:2 x FRB 30.5/680; Oil seal:TSD 3092 U; Appropriate attachment bolt, rec. tightening torque:3640 N·m; J1:260 mm; Cap bolt, rec. tightening torque:850 N·m; bb:158.5 mm; J6:1070 mm; |
| 282.30.1200.013 Type 110/1400.2 Standard 5 Slewing Ring Bearings | Cap bolt:1 1/2-6 UNC; h:79.375 mm; End plug (suffix Y):EPR 23; Stabilizing ring:SR-44-38; A1:222.25 mm; Mass pillow block:365 kg; Cap bolt, SAE grade:8; H2:95.25 mm; Ca:117.805 mm; L:831.85 mm; Eye bolt:2 x 1/2-13 UNC; Initial grease fill:2749.95 g; P90°:414 kN; PosiTrac Plus contact element:2 x B10724-167; PG:1/4 NPT; Cap bolt recommended tightening torque:4284.4 N·m; Da:399.999 mm; da:200.025 mm; |
| 91.30.1415.991.21.1502 Standard 5 Slewing Ring Bearings | Thread grub screw G2:1/4-28 UNF; J:116.5 mm; Limiting speed:6300 r/min; Rα:45 °; N:11.5 mm; Fatigue load limit Pu:0.475 kN; DN:6.5 mm; d:30.163 mm; B:30.2 mm; Basic static load rating C0:11.2 kN; B4:5 mm; Housing material:Cast iron; J6:98.5 mm; Recommended diameter for attachment bolts, mm G:10 mm; N4:2 mm; Basic dynamic load rating C:19.5 kN; s1:21 mm; L:83 mm; A3:3.2 mm; R1:21 mm; |
| 162.50.2800.891.41.1503 Standard 5 Slewing Ring Bearings | Grease Speed Rating n1:7000 rpm; d:30.000 mm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:20400 N; Basic Dynamic Radial Load Rating C:28600 N; Accessories:No Shield, no Seal,; B:23.80 mm; Sealed Speed Rating n3:7000 rpm; D:62.0000 mm; Oil Speed Rating n2:9500 rpm; |
| 92.30.1607.990.11.1502 Standard 5 Slewing Ring Bearings | RG:3/8 NPT; N1:19.05 mm; H1:95.25 mm; P150°:20.9 kN; L:330.2 mm; Ca:45.796 mm; ba:35.719 mm; P120°:23.1 kN; Initial grease fill:110.56 g; P90°:36.9 kN; P180°:25.4 kN; R2:22.225 mm; Cap bolt recommended tightening torque:149.1 N·m; PG:1/8 NPT; h:34.925 mm; Max. speed for Taconite seal:1050 r/min; J max.:279.4 mm; Housing:FSAF 517; P60°:61.4 kN; Taconite seal:TER 53; |
| 92.40.2199.991.41.1502 Standard 5 Slewing Ring Bearings | Thrust factor K:1.76; B:565.15 mm; Calculation factor Y0:2; D:946.15 mm; D1 ≈:860 mm; d1 ≈:768 mm; r1,2 min.:3.3 mm; Calculation factor Y1:2; r3,4 min.:6.4 mm; d:717.55 mm; Comparative axial load rating CFa:591 kN; Basic dynamic load rating C:14500 kN; Mass bearing:1090 kg; Calculation factor Y2:3; Calculation factor e:0.33; T:565.15 mm; Basic static load rating C0:40500 kN; Design variant/feature:TQO.1/GWI; |
| 161.50.2660.891.41.1503 Standard 5 Slewing Ring Bearings | Da max.:86 mm; r1,2 min.:2 mm; Limiting speed:7000 r/min; ra max.:2 mm; Basic static load rating C0:96.5 kN; Fatigue load limit Pu:11.4 kN; Calculation factor e:0.75; D:95.25 mm; Reference speed:5300 r/min; Basic dynamic load rating C:108 kN; B:28.3 mm; Db min.:89 mm; Cb min.:10 mm; Ca min.:4 mm; db min.:54.5 mm; d:44.45 mm; da max.:53 mm; C:20.638 mm; Calculation factor Y0:0.45; rb max.:2.3 mm; |
| 161.40.2000.890.11.1503 Standard 5 Slewing Ring Bearings | S:5.556 mm; P60°:39.1 kN; Ventilation fitting:38174-12; L:269.875 mm; A2:115.888 mm; RG:1/8 NPT; P90°:23.6 kN; J max.:228.6 mm; H:147.637 mm; A1:69.85 mm; Cap bolt recommended tightening torque:149.1 N·m; Pa:5.96 kN; Mass pillow block:10.7 kg; End plug (suffix Y):EPR 4; Ca:50.8 mm; P120°:14.2 kN; Housing:SAF 610; Max. speed for contact seal:3400 r/min; Contact seal:2 x B9784-15; |
| No. | Brand | G | J | E | b | A | F | T | U |
| 162.36.1800.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.28.1500.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 191.25.2000.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 92.40.2003.991.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 192.20.1800.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.25.1255.575.11.1403 | Standard 5 | Tr 750x7 | - | - | - | 12 mm | - | - | - |
| 11.20.1220.000.11.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.36.1900.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.30.1381.000.11.1503 | Standard 5 | M 80x4 | - | - | - | - | - | - | - |
| 60.25.1455.500.11.1503 | Standard 5 | - | - | - | - | - | 16 mm | - | - |
| 162.50.2660.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.50.2240.001.49.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.28.1400.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 91.35.1704.990.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.30.1250.000.11.1504 | Standard 5 | Tr 710x7 | - | - | - | 12 mm | - | - | - |
| 162.50.2500.891.41.1503 | Standard 5 | 169.139 mm | - | - | - | - | - | - | - |
| 161.40.2000.890.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 92.30.1799.990.11.1502 | Standard 5 | - | - | - | - | - | - | 18.161 mm | - |
| 60.25.1355.575.11.1403 | Standard 5 | - | - | - | - | - | - | - | - |
| 62.50.2490.001.49.1504 | Standard 5 | M 14x1.5 | - | - | - | - | - | - | - |
91.40.2199.990.11.1502 Standard 5 Slewing Ring Bearings Video
091.40.2199.990.11.1502 Rothe Erde Slewing Ring Bearings ...
091.40.2199.990.11.1502 ; Weight(KG), 1342 ; Racewat diameter(Dl), 2199 ; External diameter(Da), 2447,2 ; Internal diameter(Di), 2016.
091.40.2199.990.11.1502 - Slewing Ring Bearings Manufacturers ...
LYMC bearings are the perfect alternative to the most common and well-known brands.