| 161.45.2366.891.41.1503 Standard 5 Slewing Ring Bearings | d4 ≈:65 mm; Mass rod end:2.9 kg; C1 max.:28 mm; w:55 mm; l5 ≈:30 mm; α:7 °; Specific dynamic load factor K:150 N/mm²; Basic static load rating C0:224 kN; l7 min.:55 mm; dk:60 mm; B:32 mm; Basic dynamic load rating C:190 kN; Material constant KM:330; l3 min.:65 mm; h1:145 mm; l4 max.:199 mm; G:M 42x3; d2 max.:104 mm; r1 min.:0.6 mm; d:45 mm; |
| 61.25.1355.575.11.1403 Standard 5 Slewing Ring Bearings | Fillet Radius ra:1.50 mm; D:110.0000 mm; d:60.000 mm; B:38.10 mm; Oil Speed Rating n2:5000 rpm; Basic Dynamic Radial Load Rating C:78100 N; Grease Speed Rating n1:3800 rpm; Basic Static Radial Load Rating Co:88000 N; Accessories:No Shield, no Seal; Sealed Speed Rating n3:4300 rpm; |
| 62.30.1400.001.21.1504 Standard 5 Slewing Ring Bearings | D1 ≈:498 mm; Calculation factor Y2:2.1; Calculation factor e:0.48; Calculation factor Y1:1.4; Basic dynamic load rating C:4180 kN; Thrust factor K:1.22; r1,2 min.:1.5 mm; T:288.925 mm; Mass bearing:180 kg; Calculation factor Y0:1.4; B:288.925 mm; Design variant/feature:TQOSN/GWISI; Basic static load rating C0:9500 kN; d1 ≈:434 mm; r3,4 min.:6.4 mm; d:406.4 mm; Comparative axial load rating CFa:238 kN; |
| 12.30.2538.000.11.1503 Standard 5 Slewing Ring Bearings | d3:220 mm; Hydraulic nut:HMV 34 E; d:170 mm; G:M 170x3; B:33 mm; B1:101 mm; d1:152.4 mm; Mass adapter sleeve assembly:5.5 kg; |
| 92.35.1900.990.11.1502 Standard 5 Slewing Ring Bearings | Basic Radial Load Rating-Dynamic DC:74800 N; Speed Rating-Open and Shielded-Oil OSO:5600 rpm; d:55.000 mm; Diameter E:72.7 mm; Fillet Radius ra:2.00 mm; Accessories:300WI Filling Notch; D:120.0000 mm; Width - Inner Ring B1:44.45 mm; Basic Radial Load Rating-Static SCO:61000 N; Width - Outer Ring B0:29.0 mm; Speed Rating-Open and Shielded-Grease OSG:4600 rpm; |
| 62.40.1500.001.29.1504 Standard 5 Slewing Ring Bearings | Mass bearing:205 kg; Calculation factor Y2:2.5; Thrust factor K:1.47; Fatigue load limit Pu:930 kN; Calculation factor Y0:1.6; Comparative radial load rating CF:1200 kN; Comparative axial load rating CFa:231 kN; D:546.1 mm; d:409.575 mm; d1 ≈:434 mm; r1,2 min.:1 mm; r3,4 min.:6.4 mm; B:334.962 mm; D1 ≈:498 mm; Basic dynamic load rating C:4840 kN; Calculation factor Y1:1.7; Design variant/feature:TQOSN/GWSI; |
| 161.36.1800.890.11.1503 Standard 5 Slewing Ring Bearings | Da max.:75.9 mm; Sealing solution:-; Specific dynamic load factor K:100 N/mm²; rb max.:1 mm; ra max.:1 mm; α:9 °; Basic static load rating C0:670 kN; Specific static load factor K0:300 N/mm²; C:38.1 mm; da max.:62.5 mm; b1:5 mm; M:4 mm; d1 ≈:62.484 mm; Basic dynamic load rating C:224 kN; dk:73.025 mm; r2 min.:1 mm; Lubricant:Regular relubricatio; Da min.:69.4 mm; B:76.2 mm; Material constant KM:330; |
| 161.36.1700.891.41.1503 Standard 5 Slewing Ring Bearings | Static axial stiffness, preload class B:16 N/µm; Db max.:20.6 mm; Attainable speed for grease lubrication:130000 r/min; Da max.:20 mm; Attainable speed for oil-air lubrication:200000 r/min; B:7 mm; D:22 mm; Mass bearing:0.011 kg; da min.:10 mm; Reference grease quantity Gref:0.17 cm³; Calculation factor f2B:1.03; Preload class B GB:35 N; Preload class C GC:75 N; K:0.5 mm; Static axial stiffness, preload class A:11 N/µm; |
| 92.30.1607.991.21.1502 Standard 5 Slewing Ring Bearings | J max.:279.4 mm; Mass pillow block:17.1 kg; P90°:49.8 kN; J min.:244.475 mm; Housing:SAF 613; R1:53.181 mm; A2:209.55 mm; Appropriate attachment bolt size G:0.75 in; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; P150°:26.7 kN; RG:3/8 NPT; R2:21.431 mm; L:330.2 mm; N1:22.225 mm; ba:32.544 mm; Pa:6.49 kN; Ca:57.785 mm; A1:88.9 mm; Taconite seal:TER 32; |
| 92.35.2012.991.41.1502 Standard 5 Slewing Ring Bearings | d1 ≈:101.219 mm; Material constant KM:330; Design (sliding contact surface combination):Steel/steel; D:130.175 mm; da min.:89.4 mm; Basic static load rating C0:1760 kN; r2 min.:1 mm; M:6.5 mm; dk:118.745 mm; C:61.9 mm; B:123.825 mm; Mass plain bearing:5 kg; rb max.:1 mm; Sealing solution:Double-lip seals; r1 min.:1 mm; da max.:101.2 mm; Specific dynamic load factor K:100 N/mm²; Specific static load factor K0:300 N/mm²; |
| 12.25.1600.001.21.1503 Standard 5 Slewing Ring Bearings | Ca:107.798 mm; da:182.563 mm; J max.:635 mm; J1:127 mm; H2:85.725 mm; L:749.3 mm; N1:34.925 mm; A2:285.75 mm; Appropriate attachment bolt size G:1.25 in; P60°:364 kN; PG:1/4 NPT; P180°:145 kN; Cap bolt:4 x 7/8-9 UNC; Cap bolt, SAE grade:5; R1:122.237 mm; P90°:218 kN; End plug (suffix Y):EPR 21; Stabilizing ring:SR-40-34; Housing:SAF 540; H1:209.55 mm; |
| 61.40.1800.014.29.1503 Standard 5 Slewing Ring Bearings | L:330.2 mm; Cap bolt recommended tightening torque:298.3 N·m; RG:3/8 NPT; P90°:36 kN; H2:31.75 mm; H:167.481 mm; End plug (suffix Y):EPR 7; P180°:23.1 kN; da:53.975 mm; S:4.763 mm; J min.:244.475 mm; h:35.719 mm; A1:88.9 mm; Stabilizing ring:SR-16-13; P150°:19.6 kN; Ca:57.785 mm; Cap bolt:2 x 5/8-11 UNC; Housing:FSAF 613; R2:21.431 mm; N1:19.05 mm; |
| 61.30.1500.201.21.1523 Standard 5 Slewing Ring Bearings | Mass bearing:17.4 kg; d:110 mm; Da max.:123 mm; d1:230 mm; ra max.:3 mm; Fatigue load limit Pu:310 kN; r1,2 min.:3 mm; Limiting speed:1300 r/min; D:230 mm; D1:113 mm; Basic dynamic load rating C:800 kN; Basic static load rating C0:3350 kN; Reference speed:630 r/min; Minimum axial load factor A:0.898; B:24.5 mm; H:73 mm; da min.:225 mm; |
| 281.30.1200.013 Type 110/1400.1 Standard 5 Slewing Ring Bearings | r, r1,2 min.:0.3 mm; Mass inner ring:0.011 kg; d:17 mm; F:20 mm; B:16 mm; |
| 162.40.2368.890.11.1503 Standard 5 Slewing Ring Bearings | db min.:592 mm; da min.:550 mm; Limiting speed:800 r/min; ra max.:4 mm; Reference speed:560 r/min; Basic static load rating C0:14300 kN; r1,2 min.:5 mm; D1 ≈:683 mm; Design variant/feature:NNU.4/C4W33WI; s max.:4.3 mm; Da max.:740 mm; B:260 mm; b:22.3 mm; D:760 mm; Mass bearing:510 kg; da max.:580 mm; Calculation factor kr:0.34; K:12 mm; d:530 mm; r3,4 min.:12 mm; |
| 162.45.2240.890.11.1503 Standard 5 Slewing Ring Bearings | H:174.625 mm; Mass pillow block:21.3 kg; A1:88.9 mm; P180°:52.5 kN; RG:3/8 NPT; Pa:7.83 kN; Cap bolt, SAE grade:8; Stabilizing ring:SR-16-13; H2:31.75 mm; N1:23.813 mm; Labyrinth ring:2 x LOR 44; L:330.2 mm; ba:34.131 mm; S:4.763 mm; R1:53.181 mm; Housing:SAFS 516; J max.:279.4 mm; Cap bolt recommended tightening torque:298.3 N·m; R2:21.431 mm; P90°:82.7 kN; |
| No. | Brand | G | J | E | b | A | F | T | U |
| 92.30.1799.991.21.1502 | Standard 5 | - | 82.5 mm | - | - | - | - | - | - |
| 60.25.1455.575.11.1403 | Standard 5 | 239.827 mm | - | - | - | - | - | - | - |
| 11.35.1750.700.11.1503 | Standard 5 | - | 105 mm | - | - | 32 mm | - | - | - |
| 191.20.1800.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 11.25.1461.001.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 92.35.2012.991.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.40.2240.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 12.35.2690.000.11.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 91.50.2266.990.41.1502 | Standard 5 | - | 1110 mm | - | - | - | - | - | - |
| 11.40.2795.000.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 282.30.1200.013 Type 110/1400.2 | Standard 5 | - | - | - | - | - | - | - | - |
| 92.50.2842.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 61.30.1500.200.11.1504 | Standard 5 | - | - | - | - | - | - | - | - |
| 162.36.1900.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 192.25.1800.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 280.30.1475.013 Type 110/1600. | Standard 5 | - | - | - | 22.3 mm | - | - | - | - |
| 92.50.2446.990.41.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 91.30.1607.990.11.1502 | Standard 5 | - | - | - | - | - | - | - | - |
| 92.20.1246.991.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.45.2240.891.41.1503 | Standard 5 | - | - | - | - | - | - | - | - |
| 161.25.1250.891.21.1503 | Standard 5 | - | - | - | - | - | - | - | - |
280.30.1200.013 Type 110/1400. Standard 5 Slewing Ring Bearings Video
280.30.1200.013 Type 110/1400.0 Four-point contact ball slewing ...
280.30.1200.013 Type 110/1400.0 Four-point contact ball slewing rings ; overall length:: 13.0000 in ; locking device:: Double Setscrew ; duty type:: Medium Duty.
280.30.1200.013 Type 110/1400.0 Rothe erde slewing ...
280.30.1200.013 Type 110/1400.0 Rothe erde slewing bearing ; Dimension H: 4.5 in ; Bearing - Housing - Seal: MSM120BRH ; Cor - Static Load Rating: 157366 lbf.
China 281.30.1200.013 (Type 110/1400.1) Rothe Erde Ball Slewing ...
China 281.30.1200.013 (Type 110/1400.1) Rothe Erde Ball Slewing Bearing products offered by Luoyang Huayang Special ... 280.30.1200.013 (Type 110/1400.0)
280.30.1200.013 Type 110/1400.0 - Slewing Ring Bearings ...
LYMC bearings are the perfect alternative to the most common and well-known brands.
Rothe Erde® Slewing Bearings.
Except for Standard series KD 210, types 13 and 21. Table 1. Service Time in Full Load ... 280.30.1200.013. Typ 110/1400.0 ... Type 110/1400 ..... 110/1600.194 pages
280.30.1200.013 Type 110/1400.0 Rothe Erde Slewing Ring Bearings
280.30.1200.013 Type 110/1400.0 ; Weight(KG), 172 ; Racewat diameter(Dl), 1255 ; External diameter(Da), 1400 ; Internal diameter(Di), 1105 ; Overall height(H), 90.
280.30.1200.013 Type 110/1400.0 Slewing Ring Bearings
280.30.1200.013 Type 110/1400.0 Slewing Ring Bearings ; Gear, Without gear ; Type, Ball ; System of Measurement, Metric ; Inside Diameter Of Inner Ring, 1105 mm.
Buy 280.30.1200.013 Type 110/1400.0 thyssenkrupp rothe erde ...
Buy 280.30.1200.013 Type 110/1400.0 thyssenkrupp rothe erde slewing bearing from EF SLEWING BEARING CO., LTD.，thyssenkrupp rothe erde slewing bearing ...
280.30.1200.013 Type 110/1400.0 thyssenkrupp rothe erde slewing ...
Buy 280.30.1200.013 Type 110/1400.0 thyssenkrupp rothe erde slewing bearing from Turbine Bearing Supplier，Thyssenkrupp Rothe Rrde Slewing Bearing ...
Buy 280.30.1200.013 Type 110/1400.0 Rothe erde slewing bearing ...
280.30.1200.013 Type 110/1400.0 Rothe erde slewing bearing Size Chart (mm/inches). d, 17 mm. D, 35 mm. B, 10 mm. rs min, 0.3 mm. Radial clearance class, CN.